Apex Legends Pro Settings: The configurations used by the best
Apex Legends is a game that needs no introduction when talking about the Battle Royale genre. Released over three years ago, it garnered attention from streamers, content creators, and pro players. With a variety of characters, a strong arsenal of weaponry, and many ways to play, the popularity of the game is no surprise. Despite the game’s adoration, the skill ceiling is very high. However, there are many ways players can reach the top level.
From graphical fixes to micro-controller changes, improved results can be experienced by tweaking settings. For this reason, we have put together a list of setting recommendations. They will scope in on graphics, controller, extra visual, and audio areas. Additionally, we will highlight some of the best Apex Legends pro player settings. So, regardless of your platform of choice, whether you play Apex Legends ranked, or the game just for fun, we have you covered.
Graphics Settings
It is important to note that not everybody has the same display. Typically, any monitor between 144hz and 200hz is the sweet spot for gaming. This will allow you to select greater values when it comes to graphical options in-game. Additionally, good-quality monitors offer decreased controller input delay. This grants quicker in-game movements, which is pivotal at any level. Now, for display settings, you should choose either full screen or borderless.
We are aiming for a higher frame rate, and this helps us achieve that. With borderless, you can lose frames if you click in and out of a tab. Next, set the resolution to match your display. When moving onto FOV, set it between 90-100, as this will provide manageable sightlines. Also, enabling FOV scaling and setting sprint shakes to normal will avoid unnecessary movements.
Advanced Video Settings
As with all competitive games, V-Sync should be disabled. This will limit screen tearing, as small features are disabled. Turning off Adaptive supersampling will support you in maintaining frames, especially during engagements. Next, turn off Auto-aliasing. This will enable you to identify still and moving targets near objects. It will result in you visually recognizing enemies quicker near objectives. Also, if you have a performance display on, you can track how many frames you are getting.
Further down the list of options, turn Ambient occlusion to disabled. You will experience fewer world blurs, and as a result, aim and movement will improve. For PC players, reducing both Sun shadow options to low, and Spot shadow to disabled will lessen the strain on GPU and CPU. If you are running a set-up that pulls fewer frames, try turning the model and effects detail to low. Collectively, the game will run smoother with fewer disruptions.
Audio Settings
In most Battle Royales, audio settings are highly preferential. However, these tips can help any player. Firstly, set effects volume up high, as this will allow you to hear equipment usage, movements, and fire within a larger radius. Next, have a Dialogue between 50-60. You will be able to hear audio hints from characters which can help in gunfights. Furthermore, turn the music volume off. This will eliminate zone music, which can help in tense moments.
It is pivotal to use these settings before you jump into a game. Having the ability to hear gunshots, movements, and dialogue is crucial. For our next segments, we will be looking at settings for both PC and controller. As a precursor, we will focus on specific settings for each, as our audio and graphic settings can apply to both.
Apex Legends Pro Settings PC
Let us start with mouse sensitivity, as this is the key component for success. Once you have figured out your mouse DPI and decided on the value, you can move forward. The averages for top players are between 450-800. Next, set mouse sensitivity to 3.0, as this is a common starting point. With experience, anything between 1.5 and 2.0 should be tried.
Also, in the practice arena work out a suitable FOV that scales well with sensitivity. For example, a 1.8 sensitivity works strongly with 105 FOV. However, it is good to start with 100 FOV and 2.5 sensitivity before changing it up. In addition, turn off mouse acceleration for more precise inputs. Remember, you can optimize movements and gameplay by disabling V-Sync and lowering lighting variables. Finally, you can use key binds to optimize movements in the game.
Apex Legends Pro Controller Settings
Just before we jump in, here are some key gameplay settings for Apex Legends Crossplay. Turn off Double tap to sprint and turn jetpack to holding. Mechanically, working on a controller, these options are best suited. Additionally, if you have paddles, it will make movement easier. Next, the layout set on default is the most common choice for players. This provides the classic shooter experience. It is advisable for look sensitivity to be on four, and ADS on three. These can be toggled with after playtime increases.
Furthermore, switch off the dead zone, as this can prevent stick drift. For those who play a lot and are following the best Apex Legends players on console, investigate ALCs. They will provide specific controls. Below is a list of our recommended ALCs.
- Dead zone: 2%
- Outer threshold 1%
- Response curve: 9
- Yaw Speed: 400
- Pitch speed: 300
- ADS yaw speed: 130
- ADS pitch speed: 90
Apex Legends Pro Settings from top players
So, we finish our settings review by checking professional player settings. This will include both PC and console players, so for those who enjoy Apex Legends cross-play, we have you covered. You can also compete with other players with different setups. Finally, we also have an Apex Mobile Pro settings guide.
Shroud Apex Settings (PC)
Mouse Configuration
Dots per inch (DPI) | 450 |
Mouse Sensitivity | 3 |
ADS Multiplier | 1.00 |
Mouse Acceleration | Off |
Inverted | Off |
Display Settings
Display Setting | Full Screen |
Aspect Ratio | 16 x 9 |
Resolution | 2560 x 1440 |
FoV | 105 |
V-Sync | Disabled |
Adaptive Resolution FPS | 0 |
Anti-aliasing | TSAA |
Ambient Occlusion Quality | High |
Sun Shadow Coverage | Low |
Sun Shadow Detail | Low |
Spot Shadow Detail | High |
Volumetric Lightning | Disabled |
Dynamic Spot Shadows | Disabled |
Model Details | High |
Effect Details | High |
Impact Marks | High |
Read also Shroud apex setting guide.
Genburten Apex Settings (Controller)
Controller Configuration
ALC Deadzone | 2% |
Outer Threshold | 3% |
Responsive Curve | 0% |
Yaw Speed | 500 |
Pitch Speed | 500 |
ADS Yaw Speed | 130 |
ADS Pitch Speed | 130 |
Display Setting
Display Mode | Full Screen |
Resolution | 1920 x 1080 (native) |
Field of View | 110 |
FOV Ability Scaling | Disabled |
Sprint View Shake | Minimal |
V-Sync | Disabled |
Nvidia Reflex | Enabled + Boost |
Anti-Aliasing | None |
Ambient Occlusion Quality | Disabled |
Sun Shadow Coverage | Low |
Sun Shadow Detail | Low |
Spot Shadow Detail | Disabled |
Volumetric Lighting | Disabled |
Model Detail | Low |
Effects Detail | Low |
Visit Genburten Apex Settings for an in-depth guide.
iitztimmy Apex Settings (PC)
Mouse Configuration
Dots per Inch (DPI) | 1800 |
Mouse Sensitivity | 1.1 |
ADS Multiplier | 1.05 |
Mouse Acceleration | Off |
Mouse Invert | Off |
Display Setting
Display Setting | Fullscreen |
Aspect Ratio | 16:9 |
Resolution | 1920 x 1080 |
FoV | 104 |
V-Sync | Disabled |
Adaptive Resolution FPS | 0 |
Anti-aliasing | None |
Ambient Occlusion Quality | Disabled |
Sun Shadow Coverage | Low |
Sun Shadow Detail | Low |
Spot Shadow Detail | Disabled |
Volumetric Lightning | Disabled |
Dynamic Spot Shadows | Disabled |
Model Details | Low |
Effect Details | Low |
Impact Marks | Disabled |
For detailed information please visit iitztimmy Apex Settings.